Watch the video below for step by step instructions on how to install Lever Mate

Lever Mate can save your entire ride. It is not a matter of if you will crash but a matter of when. Be prepared and install Lever Mate before you ride so you don't break your levers.

1. REMOVE CLUCH PERCH FROM HANDLEBARS.

2. CLEAN INSIDE SURFACE OF PERCH (BOTH SIDES) WITH CONTACT CLEANER.

3. REMOVE BACKING FROM ROTATION TAPE.

4. STICK ROTATION TAPE ON THE INSIDE OF EACH PERCH HALF.

5. TRIM EXCESS TAPE FROM EDGES OF PERCH WITH RAZOR BLADE.

6. USE LOC TITE OR EQUILIVANT ON PERCH BOLTS WHEN REASSEMBLING PERCH HALVES ONTO HANDLEBARS.

7. ADJUST TENTION OF BOLTS TO ALLOW PERCH TO ROTATE UNDER IMPACT.